Well Water Testing & Treatment in Brunswick, ME

Test for arsenic, bacteria, iron, and hardness — then treat what your well actually has.

Water Testing for Brunswick Homes

Maine has some of the highest naturally occurring arsenic in well water in the country, and private wells are not tested by anyone unless the owner does it. If your water has never been tested — or you have iron staining, rotten-egg odor, or hard-water scale — testing tells you exactly what you are drinking and what to treat. We sample for arsenic, bacteria (coliform/E. coli), nitrates, uranium, radon-in-water, iron, manganese, and hardness, then recommend treatment sized to your results: arsenic and uranium reduction, neutralizers for acidic water, iron/manganese filtration, softeners, and UV disinfection.

Well Water Testing & Treatment in Brunswick, ME

Local well service in Brunswick

Brunswick spreads from the Androscoggin River out to the coast at Mere Point and Harpswell Neck, and its wells are just as varied. In-town neighborhoods around Maine Street and Bowdoin sit on a mix of older and newer systems, while the lots out toward Cooks Corner, Pleasant Hill, and the necks run on deep drilled bedrock wells. Being closer to the coast, some properties deal with harder water and the occasional concern about saltwater influence on shallow wells near the shore, but the bigger story is the same central-Maine bedrock chemistry: arsenic, uranium, iron, and acidic water that corrodes pipe. We service the full range — submersible and jet pumps, pressure tanks, switches, and water treatment — and we know the difference between a true pump failure and a low-yield well drawing down on one of the rockier necks. Whether you are near the old Navy base redevelopment or out on a quiet road toward Mere Point, we diagnose the actual problem and fix it so it holds through the season.

  • Sampling for arsenic, uranium, and radon-in-water
  • Bacteria (coliform / E. coli) and nitrate testing
  • Iron, manganese, hardness, and pH analysis
  • Treatment sized to your results — not a one-size box
  • Post-install retest to confirm the fix

Need water testing elsewhere? See all of our Brunswick well services or water testing across Central Maine.

Water Testing in Brunswick

Tell us what’s happening and we’ll call you back — local Brunswick service.

Prefer to talk now? Call (207) 555-0100.

Neighborhoods We Cover in Brunswick

From in-town lots to rural drilled wells — if it’s in or around Brunswick, we service it.

  • Downtown / Maine Street
  • Cooks Corner
  • Pleasant Hill
  • Mere Point
  • Brunswick Landing

Common Well Problems in Brunswick

The issues we see most on local wells — and how we fix them.

Low-yield wells on rocky coastal lots

Some properties out toward the necks have wells that draw down faster than they recharge, which looks like a failing pump but is really a low-yield well. We measure water level to tell them apart and recommend storage or pacing fixes instead of a needless pump swap.

Arsenic and acidic water from bedrock

Brunswick sits on the same arsenic- and uranium-bearing granite as the rest of the region, with widespread low-pH water. Testing and the right treatment protect both your health and your plumbing.

Hard water near the coast

Coastal-area wells here often run hard and mineral-heavy, scaling fixtures and water heaters. A softener sized to the test results clears the scale and protects appliances.

Water Testing in Brunswick — FAQs

Do you service Harpswell and the necks?
Yes — we cover Brunswick proper plus the coastal stretches toward Mere Point and the Harpswell necks, where deep drilled wells are the norm.
My pressure drops after a few minutes of running water — is the pump dying?
Not necessarily. On the rockier coastal lots that pattern often means a low-yield well drawing down past the pump, not a bad pump. We measure the well's water level so you are not paying to replace a healthy pump.
Is saltwater a concern for wells near the shore?
For most deep drilled wells it is not, but shallow wells very close to the shore can occasionally show salt influence. If you are worried, a quick test for chloride and sodium settles it.
How often should I test my well water in Maine?
The Maine CDC recommends testing for bacteria and nitrates every year, and for arsenic, uranium, and other minerals at least every few years (and after any pump or well work). If your well has never been tested for arsenic, do it now — it is the single most important test for Maine wells.
My water leaves orange/brown stains — is that dangerous?
Orange-brown staining is usually iron, and black specks or staining is often manganese. They are mostly a nuisance (laundry, fixtures, taste) rather than a health emergency, but they also wear pumps and clog filters. A test tells us how much is present so we can size the right filtration.
Can you fix acidic water that is turning my pipes green?
Yes. Blue-green staining and pinhole leaks in copper come from low-pH, acidic water — very common on Maine bedrock wells. An acid neutralizer raises the pH and protects your plumbing, pump, and fixtures.

Need Water Testing in Brunswick?

Call now for a straight answer and an up-front price — no water and frozen-line calls get priority.